![]() ![]() Scan and repair the USB in Windows Explorer Now, check if there are any files on the drive. At the prompt, enter this command attrib –h –r –s /s /d f:\*.*(replace f: with the drive letter of your USB drive) and press Enter. Check if the files are not in hidden modeġ. However, if the USB port is overloading or bad USB cable, unplug other external storage or use a different cable If the flash drive is failing, you need to turn to a good one If there is no recognized partition on the USB stick, create a new partition in Disk Management įor other causes, let’s get to know their solutions one by one. Next, remove the USB drive, re-plug in and then the driver will be reinstalled. And then go to My Computer/Manage/USB Controller/USB Mass Storage/Uninstall. If you haven’t written any data to that drive, you can recover lost partition on USB drive later.īefore taking any further step, it is suggested to reinstall USB driver first. However, don’t worry it has been formatted. It is not suggested to format the drive when you see the prompting dialogue because that will delete all data on that drive. How to get USB No Media fixed in Windows 7/8/10/11? ![]() As a result, Windows will treat the drive as an empty disk drive.Īfter knowing the reasons for USB No Media phenomenon, it is more important to learn how to get USB No Media fixed in a quick way. No Media error happens also when the flash memory controller cannot communicate with the NAND flash memory on the drive. The files on the USB drive may be damaged by computer virus.įailing flash drive, usually NAND flash failing. Overloading USB ports like inserting multiple USB drives simultaneously, or use tortured USB cable may result in the USB showing 0 bytes and No Media. Insufficient power supply to the flash from USB port. That behavior may damage stored files on the drive, so does to the MBR or PBR of the device. Remove the USB drive without ejecting or safely removing it. No recognized partition on the USB drive. Files are still there but set as hidden due to unknown reasons. In general, there are several main reasons for USB flash drive No Media error in Diskpart or Disk Management. Why would that happen? Why USB flash drive shows no media and 0 MB in Windows? That is a common problem blows out on USB flash drive, SD card, memory card and pen drive and so on. What can I do to make this flash drive usable? Here is a snapshot of Diskpart showing 0 free space. If attempting to format the drive returns the warning again: There is no disk in drive X. ![]() I cannot partition or format the USB drive. Windows Disk Management and DiskPart report No Media with 0 bytes, also 0 free space. When I plug it in Windows 7 and click on it, an error message prompts saying: Please insert a disk into drive X. “I had a problem with my PNY USB flash drive. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |